پروسسور_اودیسون Audison bit Nove

پروسسور_اودیسون Audison bit Nove

پروسسور فوق حرفه ای ۹ کانال دیجیتال شرکت اودیسون

مشخصات پروسسور_اودیسون Audison bit Nove:

پرداشگر صوتی از برند اودیسون  ۹ لاین خروجی به همراه ورودی های اپتیکال ،های لول، RCA ، AUX
مناسب برای سیستمهای صوتی فابریک وارتقا صوتی سیستمها
به همراه نرم افزار برای تنطیم با کامپیوتر

ورودی های آنالوگ: ۶ high lev. + 6 pre in

ورودی های دیجیتال: ۲

خروجی های آنالوگ: ۹

اکولایزر برای هر خروجی: Parametrics Equalizers: ±۱۲ dB;10 pole

نوع فیلتر کراس اور: Full / Hi-Pass / Low Pass / Band Pass

تجهیزات جانبی:

DRC MP

The new Audison DRC MP (Digital Remote Control Multimedia Play) is compatible with all the Audison electronics featuring AC Link bus. Its slim profile along with the holder supplied with it eases the installation in the best position inside the car. Thanks to the new Joystick, “Rubber Touch” finished for best control of the movements along the four direction axes, the “DRC Settings” menu can be adjusted and navigation is also possible through the “Navi Command” function if the system features an Audison bit Play HD with video output connected to a monitor.

DRC AB

DRC AB enables the main system control (volume, balance, fader and subwoofer volume, bass-boost) without the use of a PC. Thanks to this device, installed in an ergonomic position within the car dashboard, the user can: choose between the four DSP presets and select the source among master, auxiliary and the two optical digital inputs.

ECK DRC

It is a kit composed of a cable and an adapter allowing a 2 m / 78.74 in. additional extension of the cable supplied with the DRC. This extension is required for installations on especially long vehicles such as SUV’s. Total length of the supplied cable with the extension is equal to 6,5 m / 225.90 in.

PACKAGE: Polybag – Qty. 1

SPM 4

Stereo passive mixer (unpowered) featuring 4 input channels and 2 output channels, designed for active OEM multi-way systems where each speaker is powered by one specific amplified channel. SPM4 mixes audio through 4 audio transformers specifically developed to achieve very low distortion and highly linear acoustic response. SPM4 provides the ability to mix the midrange/woofer and tweeter channels coming from the amplifier and supply one single mid-high channel. The Ch1(L/R) channels feature two inputs, one features an inverting input compared to Ch2 (L/R) channels; the mixing process often gives better results when one of the two channels undergoes a 180° dephasing. SPM4 is especially recommended to extend the number of inputs of the Audison digital processors or amplifiers with built-in DSP because they feature a De-equalizer (De-Eq). In that case, any possible non-linear acoustic emissions due to the mixing of the pre-existing filtered channels are duly compensated.

ES3

It prevents the processor from shutting down when turning on vehicles featuring the start & stop system

When starting the engine, the vehicle battery voltage might decrease below 8 Volts value. If an Audison bit processor is installed in your system, especially with vehicles featuring the start & stop system, low supply voltage values might make the processor shut down. In order to avoid waiting for the processor to complete its turn-on cycle again, you can install the ES3 by connecting it in series to the processor power supply cables.

STR

Male-Female Toslink adapter with rotating head. 90° angle shape to save space.

PACKAGE: Polybag Qty. 1

STA

Optical adapter to extend optical cables featuring TOSLINK connectors.

PACKAGE: Polybag – Qty. 1

PIC 6

RCA connector for effortless and fast connections between the head unit PRE OUTs (1,2 min.) and the bit Nove PRE inputs.

PACKAGE: Carton Box – Qty. 1

OP 4.5

Optical digital audio signal cable, designed for car audio applications, allowing the transfer of the optical signal without signal loss. An especially thicker sheath protects the optical fibre to prevent the cable from damages if it is pressed against sharp edges.The metal connector protects the optical fibre along its full length, ensuring a stable transmission of the signal also in the event of strong vibrations.  Ending with Toslink connectors for S/PDIF digital audio signals.

Cable length 4,5 m/177,16”

PACKAGE: Polybag Qty. 1

OP 1.5

Optical digital audio signal cable, designed for car audio applications, allowing the transfer of the optical signal without signal loss. An especially thicker sheath protects the optical fibre to prevent the cable from damages if it is pressed against sharp edges. The metal connector protects the optical fibre along its full length, ensuring a stable transmission of the signal also in the event of strong vibrations.  Ending with Toslink connectors for S/PDIF digital audio signals.

Cable length 4,5 m/177,16”

PACKAGE: Polybag Qty. 1